Welcome to Hebei Peter Geng Double Face Leather Co., Ltd

Hebei Peter Geng Double Face Leather Co., Ltd

Home

What are the production processes of LINING Long fur coat

Release time:

2023/02/15

【Summary】 LINING Long fur coat allows irregular mating surfaces to be filled on machine parts. LINING Long fur coat is usually produced by cutting from a sheet. Gaskets used in specific applications, such as high-pressure steam systems, may contain asbestos.

LINING Long fur coat allows irregular mating surfaces to be filled on machine parts. LINING Long fur coat is usually produced by cutting from a sheet. Gaskets used in specific applications, such as high-pressure steam systems, may contain asbestos. However, due to the health hazards associated with asbestos contact, non-asbestos gasket materials are actually used.

It is generally desirable that LINING Long fur coat is made of a material that is produced to some degree so that it can deform and tightly fill the space of its design, including any slight unevenness. Some gaskets require the sealant to be applied directly to the LINING surface to work properly. Some (pipes) LINING are made entirely of metal and rely on the seat surface to complete the seal; use the spring characteristics of the metal itself (reach but not exceed σy, the yield strength of the material). This is a typical "ring joint" (RTJ) or some other metal gasket system. These joints are called R-con and E-con compression joints.
In summary, it is a brief introduction to the relevant knowledge about LINING Long fur coat.